home *** CD-ROM | disk | FTP | other *** search
- TMPL_10000_modm.txt
- Version
- (should be 2): 2-byte integer (decimal)
- (bit field)
- Reserved bit: boolean
- Reserved bit: boolean
- Modem will enter to command mode after a break: boolean
- Reserved bit: boolean
- Reserved bit: boolean
- Reserved bit: boolean
- Reserved bit: boolean
- Modem should default to Hardware MNP: boolean
- (bit field)
- Modem should default to Software MNP: boolean
- Modem can support Software MNP: boolean
- Modem can support Hardware MNP: boolean
- Reserved bit: boolean
- Direct mode (baud buffered): boolean
- CONNECT means 300 bps with this init string: boolean
- Reserved bit: boolean
- Carrier Detect Signal provided: boolean
- Initialization String: pstring (1-byte length) (padded to 2-byte alignment)
- Ring Response String: pstring (1-byte length) (padded to 2-byte alignment)
- Preferred Baudrate
- (0 if none): 4-byte integer (decimal)
- Preferred Port
- (empty if none): pstring (1-byte length) (padded to 2-byte alignment)
- Preferred Handshake
- 0 any
- 1 None
- 2 XOn/XOff
- 3 DTR/CTS
- 4 DTR
- 5 CTS: 2-byte integer (decimal)
- Disable Hardware MNP AT Command: pstring (1-byte length) (padded to 2-byte alignment)
- Hardware MNP Confirmation String: pstring (1-byte length) (padded to 2-byte alignment)
- Cabling… PICT resource: 2-byte integer (decimal)
- Break duration in ticks to enter command mode ( 14 = short, 210 = long ): 2-byte integer (decimal)
-
-